> For the complete documentation index, see [llms.txt](https://docs.roboflow.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.roboflow.com/deployment/self-hosted/enterprise/deployment-manager/making-changes/soft-reset-poe-port.md).

# Restart a PoE Port

Restart a camera's PoE port from the dashboard to recover a stuck camera link on supported edge devices.

On edge devices with Power over Ethernet (PoE) camera ports, you can restart the port a camera uses from Deployment Manager. Use it to recover a stuck camera link without physical access to the device.

What a restart does depends on the device:

* Advantech MIC-712-OX: turns power off and on for that one port.
* Seeed reComputer: turns power off and on for all PoE ports at once, so every PoE camera on the device restarts.
* Advantech MIC-733-AO: a soft reset. The device resets Lucid cameras on that port and takes the port's link down and up. Power stays on.

{% hint style="info" %}
The restart control appears only when the device reports PoE support for the camera's port. It does not appear for the device's uplink port or on devices without PoE control.
{% endhint %}

## Restart a Port

You need permission to manage devices. Use either place:

* Open the Stream. Below the preview, click the restart button. It names the port (ex: "Restart PoE Port ETH1", or "Soft Reset PoE ETH1" on devices with soft reset). On devices with one shared power rail it reads "Restart PoE Power (All Ports)". The button hides while the Stream has unsaved changes.
* In the "Cameras" table, click the restart button on the camera's row, or open the row's "Diagnostics".

The command goes to the device the next time it checks in, usually within a few seconds. The camera reconnects once the port comes back up.

## Restart Once per Maintenance Window

You can have a Stream restart its PoE port once in each [maintenance window](https://docs.roboflow.com/deployment/self-hosted/enterprise/deployment-manager/setting-up/setup-maintenance-windows.md). This helps with GigE or PoE camera links that drop during long sessions.

Open the Stream, click "Edit" on its "Configuration" panel, check "Soft-reset PoE once per maintenance window", then click "Save Changes".

During each window, Roboflow sends one restart per port, even when several Streams share it. Streams whose port has no PoE control are skipped.
